• 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
  • :+91-9312-871-070
RO Membrane Preservative in Bhopal - Innova Corporate India

RO Membrane Preservative in Bhopal

An RO membrane that sits idle for weeks without protection doesn't just collect dust — it becomes a breeding ground for bacteria and fungi, and its TFC layer slowly dries out. By the time the plant restarts, the damage is already permanent. Innova Corporate (India)'s RO Membrane Preservative in Bhopal is designed precisely for this scenario — keeping membranes biologically inert and structurally intact through pharma maintenance shutdowns, monsoon breaks and seasonal turnarounds across Mandideep, Govindpura, BHEL Ancillary and Acharpura units.

Unlike antiscalants that work on scaling chemistry, a preservative addresses a completely different problem: microbial contamination and dehydration during offline periods. Our formulation displaces feed water inside the membrane elements and replaces it with a protective solution that halts bacterial and fungal activity — ensuring your expensive membranes come back online with the same rejection and flux they had before shutdown. For Bhopal plants running on high-TDS groundwater, where biological load is already elevated, this step is non-negotiable.

Application & Dosage for Bhopal Plants:

The application method involves displacing the feed water with a prepared preservative solution. Since requirements vary based on the duration of the shutdown and system size — from small pharma RO skids to large BHEL ancillary units — you are requested to contact our Bhopal representative for advice on the best dosage and application protocol for your specific plant.

Handling Measures & Safety Precautions:

Proper human safety gear such as splash goggles, lab coats, vapor respirators, gloves, and boots must be worn while handling and applying chemicals at your Bhopal site.

* Skin Contact: Wash off with water immediately.
* Eye Contact: Flush with fresh water and seek medical attention immediately.
* Important: Product should not be injected. Please refer to the MSDS for comprehensive safety details.

Storage: This product should be stored in original containers in a cool and dry place in Bhopal, away from sources of heat, flame, and direct sunlight. Refer to the Technical Data Sheet (TDS) and Label for shelf-life information.