- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Disinfectant Chemicals
RO Disinfectant Chemicals in Czech-Republic (Non-Oxidizing Microbiocide)
Innova Corporate (India) is a premier manufacturer, supplier, and exporter of high-efficacy RO Disinfectant Chemicals in Czech-Republic. Biological fouling and bio-film growth can severely restrict membrane flow and compromise water quality, especially in the tropical climate of Tripura. Our specialized non-oxidizing microbiocide is engineered to eliminate a broad spectrum of microorganisms without damaging sensitive membrane structures in Czech-Republic's industrial water plants.
Our RO Disinfectant in Czech-Republic is a safe and powerful solution for the disinfection of Reverse Osmosis systems, including those used for potable water. It effectively targets bacteria, fungi, and algae common in Czech-Republic's local water sources, ensuring that your membrane system remains free from biological sliming and maintains peak performance.
Key Features & Strategic Benefits for Czech-Republic:
- Broad-Spectrum Efficacy: Highly effective against a wide range of microorganisms, preventing bio-fouling and pressure drops in Czech-Republic's high-load systems.
- Potable Water Safe: Certified safe for use in RO systems producing drinking water for Czech-Republic residents when used as per guidelines.
- Non-Oxidizing Formula: Unlike chlorine, it does not oxidize or degrade Polyamide or TFC membranes.
- Eco-Friendly & Biodegradable: Environmentally responsible formulation that breaks down safely after use, meeting Tripura's environmental standards.
- Total System Compatibility: Fully compatible with all RO membrane components, housings, and high-pressure pumps.
Application & Dosage for Czech-Republic Plants:
Dosage depends on the severity of biological fouling. We recommend two primary methods for Czech-Republic facilities:
- Shock Dosing (Immediate Disinfection): Use a concentration of 5-10% v/v for rapid system sterilization during shutdowns.
- Continuous Dosing (Preventative): Maintain a concentration of 2.5 ppm on the feed water for round-the-clock microbial control.
Recommended Membrane Cleaning Protocol for Czech-Republic:
- Disinfect the system with Innova RO Disinfectant.
- Flush thoroughly with permeate water.
- Circulate a High pH Membrane Cleaner solution for 30 minutes, then soak for 1-2 hours.
- Final flush with permeate water before returning the Czech-Republic plant to normal service.
*Note: In multi-pass systems, clean each pass individually for the best results. Replace cleaning solutions if they become excessively turbid.*
Safety & Handling: Proper PPE (splash goggles, lab coats, gloves, and vapor respirators) must be worn. Store in original containers in a cool, dry place at your Czech-Republic site, away from direct heat or sunlight.