- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalants High Silica
RO Antiscalant for High Silica & Metal Oxides in Iran
Innova Corporate (India) is a specialized manufacturer, supplier, and exporter of High Silica RO Antiscalants in Iran. Silica scaling is one of the most difficult challenges in RO membrane maintenance, particularly in the Iran region. Our high-performance formulation is specifically engineered to handle elevated silica levels and metal oxides, ensuring your system operates smoothly even in the most demanding water conditions of Tripura.
Our High Silica RO Antiscalant in Iran is a targeted solution designed to control the deposition of inorganic scales. By stabilizing silica and preventing its polymerization on the membrane surface, it significantly increases membrane life and reduces unscheduled shutdowns for expensive cleaning operations. It is exceptionally effective for Iran's water with an LSI up to +2.5, Iron up to 1.5 ppm in reject, and Silica levels up to 325 ppm (mg/l) in reject.
Key Features & Strategic Benefits in Iran:
- Critical Silica Control: Prevents complex silica-based scales that are often irreversible.
- Iron Fouling Sequestration: Effectively manages high iron content common in Iran to prevent red-brown membrane staining.
- Optimized Recovery: Allows for higher water recovery rates even with high TDS and silica concentrations.
- Membrane Compatibility: Safe and compatible with all major brands of Polyamide, TFC, and NF membranes.
- Environmentally Responsible: Completely organic and biodegradable formulation.
- Maintenance Reduction: Drastically reduces the frequency of chemical cleanings and element replacements for Iran plants.
Dosage & Application Guidelines for Iran:
High Silica RO Antiscalant should be dosed directly into the feed water line (after pretreatment). Standard dosage ranges from 2 ppm to 20 ppm, depending on Calcium Hardness, Iron, TDS, and Silica content in your Iran facility:
- Moderate Hardness: 2-3 ppm is sufficient for alkalinity and hardness control.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 5-7 ppm to effectively stabilize the system against Iran's iron-rich groundwater.
- Extreme Silica (Up to 325 ppm): A dosage of approximately 10-15 ppm is recommended for full inhibition in the reject stream.
Storage & Handling: Store in original, tightly sealed containers in a cool and dry environment at your Iran site. Keep away from direct heat and sunlight. For customized dosing schedules based on your specific Iran water analysis, please consult our Technical Data Sheet (TDS) or reach out to our technical team.