- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of High Silica RO Antiscalant
High Silica RO Antiscalant in Kohima (Extreme Scale Control)
High silica levels in feed water can severely limit the recovery rate of an RO plant. Innova Corporate (India) specializes in High Silica RO Antiscalant in Kohima, a product that allows industries to operate at higher water efficiency by keeping silica in a soluble state beyond its natural saturation point in Kohima water.
This antiscalant is a lifesaver for Kohima operations that would otherwise struggle with "glass fouling" on their membranes. By preventing silica precipitation, it ensures that the system remains clean and the membranes stay productive. For industrial plants in Kohima Nagaland, this translates to less wastewater discharge and a significant reduction in the total cost of water per liter produced.
Key Features & Strategic Benefits in Kohima:
- Extreme Silica Inhibition: Effectively controls silica scales up to 325ppm in the concentrate stream.
- Iron Sequestration: Advanced formula prevents iron fouling, a common issue in Kohima water.
- High Recovery Rates: Allows systems to operate at higher recovery levels without compromising membrane integrity.
- Broad Spectrum Efficiency: Works across a wide range of pH, TDS, and high SDI (Silt Density Index) water in Kohima.
- Cost Optimization: Low dosage requirements (2ppm to 20ppm) result in significant operational savings.
- Environmental Safety: Completely organic, biodegradable, and compatible with all membrane types.
Application & Dosage: For plants in Kohima, the product should be dosed directly into the RO feed water tank or line after pretreatment. The dosage typically ranges from 2ppm to 20ppm, depending on the specific water chemistry including Calcium Hardness, Alkalinity, and Silica content. For water with high iron (0.5 to 1.0ppm), a dosage of 5-7ppm is recommended to ensure full stabilization.
Storage & Stability: Store in original, tightly sealed containers in a cool and dry environment at your Kohima facility. Protect from direct sunlight and heat sources to maintain chemical potency. For detailed application guidelines and safety protocols, please refer to the Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS).