- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalants High Silica
RO Antiscalant for High Silica & Metal Oxides in Korea
Silica fouling is a major challenge in some Korean regions. Innova Corporate (India) provides RO Antiscalant High Silica in Korea to handle water sources where silica is the primary limiting factor for water recovery.
Our formula extends the silica saturation limit, allowing Korea plants to operate at higher efficiencies. By preventing the formation of hard silica scale, we help Korea based companies avoid the permanent damage that silica can cause, saving on capital costs and ensuring the longevity of their RO membranes in Korea.
Key Features & Strategic Benefits in Korea:
- Critical Silica Control: Prevents complex silica-based scales that are often irreversible.
- Iron Fouling Sequestration: Effectively manages high iron content common in Korea to prevent red-brown membrane staining.
- Optimized Recovery: Allows for higher water recovery rates even with high TDS and silica concentrations.
- Membrane Compatibility: Safe and compatible with all major brands of Polyamide, TFC, and NF membranes.
- Environmentally Responsible: Completely organic and biodegradable formulation.
- Maintenance Reduction: Drastically reduces the frequency of chemical cleanings and element replacements for Korea plants.
Dosage & Application Guidelines for Korea:
High Silica RO Antiscalant should be dosed directly into the feed water line (after pretreatment). Standard dosage ranges from 2 ppm to 20 ppm, depending on Calcium Hardness, Iron, TDS, and Silica content in your Korea facility:
- Moderate Hardness: 2-3 ppm is sufficient for alkalinity and hardness control.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 5-7 ppm to effectively stabilize the system against Korea's iron-rich groundwater.
- Extreme Silica (Up to 325 ppm): A dosage of approximately 10-15 ppm is recommended for full inhibition in the reject stream.
Storage & Handling: Store in original, tightly sealed containers in a cool and dry environment at your Korea site. Keep away from direct heat and sunlight. For customized dosing schedules based on your specific Korea water analysis, please consult our Technical Data Sheet (TDS) or reach out to our technical team.