- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalant High pH
RO Antiscalant High pH in Mathura (Super-Threshold Formula)
Innova Corporate (India) manufactures RO Antiscalant High pH in Mathura for systems operating in alkaline environments. This specialty antiscalant remains effective even at high pH levels, providing reliable scale inhibition for Mathura's industrial wastewater recovery units.
It is specifically designed for Mathura's industries where maintaining a high pH is necessary for specific process efficiency. This product ensures that membranes remain clean even under challenging chemical conditions, making it the ideal solution for specialized industrial applications in Mathura.
Key Features & Strategic Benefits in Mathura:
- Advanced Scale Inhibition: Effectively controls Calcium Carbonate, Sulfates (Barium, Strontium, Magnesium), and Calcium Fluoride.
- Dual Action: Acts as both a powerful scale inhibitor and an Alkalinity Builder for Mathura RO systems.
- Superior Sequestration: Provides excellent control over Iron fouling, a common issue in Mathura's groundwater.
- Eco-Friendly: Fully organic and biodegradable formulation, minimizing environmental impact.
- Cost-Efficiency: Low chemical dosage requirement leads to a higher recovery rate and reduced cleaning frequency for local plants.
- Wide Compatibility: Compatible with all major membrane brands and INNOVA series coagulants/flocculants.
Dosage & Application Guidelines for Mathura:
Our High pH Antiscalant should be dosed directly into the RO feed water tank or line (post-pretreatment). Dosage typically ranges from 1 ppm to 15 ppm, depending on the following parameters in your Mathura facility:
- Standard Conditions: 1-5 ppm for moderate hardness and TDS.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 10-15 ppm to stabilize Calcium and Iron effectively, especially for Mathura borewell water.
- Silica Management: At 10-15 ppm, the formula can fully inhibit Silica up to 166 ppm.
Storage & Safety: Store in original, tightly sealed containers in a cool, dry place at your Mathura site. Keep away from direct heat and sunlight. For precise dosing calculations based on your water analysis, please refer to the Technical Data Sheet (TDS) or contact our experts specializing in Mathura water treatment.