- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalant High pH
RO Antiscalant High pH in Agartala (Super-Threshold Formula)
Innova Corporate (India) provides specialized RO Antiscalant High pH in Meerut for systems operating in alkaline ranges. This product is designed to remain effective at high pH levels, providing reliable scale inhibition for Meerut's industrial wastewater recovery and recycling plants.
It is specifically engineered for Meerut's industries where maintaining high pH is necessary for process efficiency. This antiscalant ensures that membranes stay clean under challenging conditions, making it a specialized solution for the growing water recycling market in Meerut.
Key Features & Strategic Benefits in Agartala:
- Advanced Scale Inhibition: Effectively controls Calcium Carbonate, Sulfates (Barium, Strontium, Magnesium), and Calcium Fluoride.
- Dual Action: Acts as both a powerful scale inhibitor and an Alkalinity Builder for Agartala RO systems.
- Superior Sequestration: Provides excellent control over Iron fouling, a common issue in Agartala's groundwater.
- Eco-Friendly: Fully organic and biodegradable formulation, minimizing environmental impact.
- Cost-Efficiency: Low chemical dosage requirement leads to a higher recovery rate and reduced cleaning frequency for local plants.
- Wide Compatibility: Compatible with all major membrane brands and INNOVA series coagulants/flocculants.
Dosage & Application Guidelines for Agartala:
Our High pH Antiscalant should be dosed directly into the RO feed water tank or line (post-pretreatment). Dosage typically ranges from 1 ppm to 15 ppm, depending on the following parameters in your Agartala facility:
- Standard Conditions: 1-5 ppm for moderate hardness and TDS.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 10-15 ppm to stabilize Calcium and Iron effectively, especially for Agartala borewell water.
- Silica Management: At 10-15 ppm, the formula can fully inhibit Silica up to 166 ppm.
Storage & Safety: Store in original, tightly sealed containers in a cool, dry place at your Agartala site. Keep away from direct heat and sunlight. For precise dosing calculations based on your water analysis, please refer to the Technical Data Sheet (TDS) or contact our experts specializing in Agartala water treatment.