- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Dechlorination Chemicals
RO Dechlorination Chemicals in Saudi Arabia (Oxidizing Agent Neutralizer)
Chlorine is unavoidable in most Saudi Arabia water treatment plants. It is used to control biological growth in intake lines, storage tanks and pre-treatment stages. But the same chlorine that protects the plant upstream will destroy the RO membrane downstream. Polyamide and TFC membranes used in Jubail, Yanbu and Ras Al Khair desal plants are highly sensitive to oxidation — even short exposure permanently reduces rejection efficiency and leaves you facing element replacement. Innova Corporate (India) supplies a high-purity RO Dechlorination Chemical in Saudi Arabia that removes residual chlorine before it reaches the membrane, protecting performance and extending element life across the Kingdom's industrial belt.
Our RO De-chlorinator in Saudi Arabia is a concentrated, stabilized liquid designed for complete elimination of residual chlorine prior to the RO system. By removing strong oxidizing agents upstream, it prevents membrane degradation and keeps rejection performance and flow rate stable in water treatment plants across Jubail, Yanbu, Ras Al Khair, Jeddah and Dammam. The liquid format is easier to dose accurately than powder alternatives, which matters most for plants running continuous high-pressure RO cycles.
Key Features & Strategic Benefits for Saudi Arabia Industries:
- Rapid Neutralization: Stabilized formula ensures near-instant action in neutralizing free chlorine in the feed water, even when chlorine levels fluctuate.
- Critical Membrane Protection: Guards Polyamide and TFC membranes against oxidative degradation and chemical "burning" in Saudi Arabia's desal and industrial treatment facilities.
- Liquid Precision: Unlike conventional powders, our liquid formula is easy to handle, store and dose with high accuracy at your Saudi Arabia site.
- Enhanced Stability: Significantly more stable and effective than traditional sodium bisulfite solutions, especially at the high operating temperatures seen in Gulf plants.
- System Longevity: Prevents premature membrane replacement by continuously shielding elements from chlorine attack — a critical factor for plants running continuous desal cycles.
Application & Dosage Guidelines for Saudi Arabia:
Dosage depends on the residual chlorine level and required contact time. For typical Saudi Arabia water conditions, the recommended range is 3 ppm to 15 ppm.
- Injection Point: Dose as close to the RO system as possible, for example just before the cartridge filters.
- High Chlorine Strategy: If free chlorine is high, dose de-chlorinator before antiscalant injection, since chlorine can neutralize antiscalant performance.
- Safe Mixing: Never mix concentrated de-chlorinator and antiscalant directly; keep dosing points properly spaced in your Saudi Arabia plant setup.
Handling & Safety Measures:
Always wear proper safety gear, including splash goggles, lab coats, gloves and vapor respirators. In case of skin contact, wash immediately with plenty of water. Store in original containers in a cool, dry place at your Saudi Arabia facility, away from direct sunlight and heat sources.
*Note: As a company policy, Innova Corporate recommends consulting our service engineers in Saudi Arabia for precise dosage requirements based on your specific water chemistry.