- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalant High pH
RO Antiscalant High pH in Uk (Super-Threshold Formula)
Innova Corporate (India) manufactures RO Antiscalant High pH in the UK for systems operating in alkaline environments. This product remains effective at high pH levels, providing scale inhibition for the UK's industrial wastewater recycling and specialized process water plants.
It is specifically designed for UK industries where maintaining a high pH is necessary for chemical stability or specific process goals. This antiscalant ensures that membranes stay clean under challenging conditions, making it a specialized solution for the UK industrial water market.
Key Features & Strategic Benefits in Uk:
- Advanced Scale Inhibition: Effectively controls Calcium Carbonate, Sulfates (Barium, Strontium, Magnesium), and Calcium Fluoride.
- Dual Action: Acts as both a powerful scale inhibitor and an Alkalinity Builder for Uk RO systems.
- Superior Sequestration: Provides excellent control over Iron fouling, a common issue in Uk's groundwater.
- Eco-Friendly: Fully organic and biodegradable formulation, minimizing environmental impact.
- Cost-Efficiency: Low chemical dosage requirement leads to a higher recovery rate and reduced cleaning frequency for local plants.
- Wide Compatibility: Compatible with all major membrane brands and INNOVA series coagulants/flocculants.
Dosage & Application Guidelines for Uk:
Our High pH Antiscalant should be dosed directly into the RO feed water tank or line (post-pretreatment). Dosage typically ranges from 1 ppm to 15 ppm, depending on the following parameters in your Uk facility:
- Standard Conditions: 1-5 ppm for moderate hardness and TDS.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 10-15 ppm to stabilize Calcium and Iron effectively, especially for Uk borewell water.
- Silica Management: At 10-15 ppm, the formula can fully inhibit Silica up to 166 ppm.
Storage & Safety: Store in original, tightly sealed containers in a cool, dry place at your Uk site. Keep away from direct heat and sunlight. For precise dosing calculations based on your water analysis, please refer to the Technical Data Sheet (TDS) or contact our experts specializing in Uk water treatment.