- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of High Silica RO Antiscalant
High Silica RO Antiscalant in Gurugram (Extreme Scale Control)
When a Gurugram RO plant sees silica in the reject stream creeping past 250 ppm, standard antiscalants simply stop working. The polymer chain that holds silica in solution gets overwhelmed, and reactive silica begins to polymerise into a hard glass-like layer on the membrane surface — a deposit that no acid cleaner can fully remove. Innova Corporate (India) supplies a specialist High Silica RO Antiscalant in Gurugram built for exactly this scenario. It is formulated for the worst-case water profiles seen across IMT Manesar, Pataudi Road, Udyog Vihar and the older sectors near Sector 34 and Sector 37, where silica, iron and high SDI often occur together.
Our High Silica RO Antiscalant in Gurugram is a superior antifoulant designed to inhibit deposition of inorganic scales, metal oxides and elevated silica simultaneously. It is a critical pretreatment step for Gurugram feed water with LSI up to +2.5, iron up to 1.5 ppm in reject, and silica up to 325 ppm (mg/L). By stopping scale before it sets, it extends membrane life, stabilises recovery and eliminates the unscheduled shutdowns that plague plants running on difficult Gurugram borewell water.
Key Features & Strategic Benefits in Gurugram:
- Extreme Silica Inhibition: Controls silica scales up to 325 ppm in the concentrate stream — covering the worst-case Gurugram water profiles from IMT Manesar and Pataudi Road feeds.
- Iron Sequestration: Advanced formula prevents iron fouling, a recurring problem in Gurugram's older borewell networks and mixed industrial-municipal feed water.
- High Recovery Rates: Allows systems to operate at higher recovery levels without compromising membrane integrity, which matters most for plants chasing water efficiency targets.
- Broad Spectrum Efficiency: Works across a wide range of pH, TDS and high SDI conditions typical of Gurugram industrial feed water.
- Cost Optimization: Low dosage requirements (2 ppm to 20 ppm) deliver significant operational savings over the course of a year.
- Environmental Safety: Fully organic, biodegradable and compatible with all major membrane types used in the region.
Application & Dosage: For plants in Gurugram, dose the product directly into the RO feed water tank or line after pretreatment. Typical dosing ranges from 2 ppm to 20 ppm, depending on calcium hardness, alkalinity and silica content in your water. For feeds with high iron (0.5 to 1.0 ppm) — a common condition in the older industrial sectors around Sector 34 and Sector 37 — a dosage of 5-7 ppm is recommended for full stabilisation.
Storage & Stability: Store in original, tightly sealed containers in a cool and dry environment at your Gurugram facility. Protect from direct sunlight and heat sources to maintain chemical potency. For detailed application guidelines and safety protocols, refer to the Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS).