- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of Peracetic Acid Based RO Disinfectant
Peracetic Acid RO Disinfectant for Philippines Plants (Chlorine-Free Membrane Sanitizer)
Philippines' year-round warm and humid climate creates a microbial problem that RO plants in cooler countries simply don't face. Feed water temperature stays between 26 and 32°C for most of the year, and this is the ideal range for rapid bacterial growth. Without effective disinfection, biofilm can form inside RO pretreatment and on membrane surfaces within 7 to 10 days. Innova Corporate (India) supplies this Peracetic Acid (PAA) based RO disinfectant for Philippines plants specifically to control that microbial load without the membrane damage caused by chlorine-based alternatives.
Peracetic acid is a powerful oxidising biocide, but unlike chlorine or hypochlorite, it decomposes into acetic acid (vinegar) and oxygen — both harmless to polyamide and thin-film composite (TFC) membranes at controlled dosage. This makes it the preferred choice for Philippines food, beverage, and pharmaceutical plants where membrane integrity, microbial compliance, and taste neutrality all matter at the same time.
The formula is also non-rinsing — PAA breaks down completely during the standard permeate flush, leaving no chlorinated byproducts, no residual odour, and no risk of chlorophenol formation that could affect product taste. For Philippine beverage bottlers, soft drink manufacturers, and brewing plants exporting to strict markets, this is a critical advantage over traditional sanitizers.
Key Features for Philippines Industries:
- Broad-Spectrum Microbiocide: Rapidly eliminates bacteria, viruses, moulds, spores, and established biofilm — effective even in Philippines' warm tropical feed water where microbial regrowth is fast.
- Chlorine-Free Sterilization: Provides powerful oxidation without attacking polyamide or TFC membranes — no irreversible salt rejection loss, no accelerated membrane replacement.
- Eco-Friendly & Biodegradable: Decomposes into acetic acid and oxygen — no chlorinated byproducts, no environmental footprint, compliant with Philippines DENR discharge norms.
- Potable Water Approved: Ideal for food, beverage, dairy, and drinking water RO applications — meets FDA Philippines requirements when used per recommended dosage.
- Taste-Neutral Performance: No residual chlorine taste or odour in treated permeate — critical for Philippines beverage bottling and soft drink manufacturing.
- Cold Sterilization Efficiency: Highly effective at ambient Philippines temperatures — no thermal disinfection or heated CIP required.
- Wide Material Compatibility: Safe for RO, NF, and UF membranes, plus all standard housings, gaskets, O-rings, and CIP skid components used across Philippines plants.
- Halal & Export Compliant: Suitable for Philippines food export plants supplying Halal-certified markets across Southeast Asia and the Middle East.
Recommended Dosage & Application in Philippines:
Shock Dose: For immediate system disinfection, use a concentration of 5–10% v/v — ideal for Philippines plants restarting after typhoon-season downtime or extended shutdowns.
Continuous Dose: For round-the-clock microbial control, maintain a maximum of 2.5 ppm in the feed water — standard practice for Manila food processing and beverage bottling RO lines.
Sanitization Procedure for Philippines Plants: First rinse the system with permeate water. Circulate the Peracetic Acid solution through the membrane train, followed by a flush with a High pH membrane cleaner for 30 minutes. Allow a soak time of 1–2 hours for deep biofilm penetration. Finally, flush the system thoroughly with permeate water before returning the plant to normal service.
Recommended Applications in Philippines: Manila food processing and beverage bottling plants; Cebu dairy and juice manufacturing; Davao tropical fruit processing and export units; Laguna pharmaceutical and cosmetic manufacturing; semiconductor and electronics plants requiring ultra-pure RO permeate; hotel and resort desalination units in Palawan and Boracay; municipal potable water RO systems across Metro Manila and surrounding provinces.
Storage & Safety: Peracetic acid is a strong oxidiser — store in original vented containers in a cool, well-ventilated area at your Philippines facility, away from heat, direct sunlight, and combustible materials. Use appropriate PPE (splash goggles, face shield, chemical-resistant gloves, apron) during handling. Do not mix with alkaline chemicals. Refer to the Material Safety Data Sheet (MSDS) and Technical Data Sheet (TDS) for complete handling and safety protocols.
Export & Technical Support for Philippines: We ship regularly to Manila, Cebu, Davao, and other industrial cities across the Philippines with full customs documentation. Our technical team provides free CIP protocol guidance for peracetic acid disinfection — including dosage calculation, contact time, temperature limits, and post-disinfection flush procedure — tailored to your specific membrane model, feed water quality, and regulatory requirements including FDA Philippines and Halal certification support.