- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of Cleaner For Iron Fouled Membrane
Iron Fouled RO Membrane Cleaner for Myanmar Plants (Rust & Iron Oxide Removal)
Iron is one of the most common — and most mishandled — fouling problems in Myanmar's industrial RO plants. Borewell water in several parts of Yangon's industrial belt, Bago, and the delta region near Pathein regularly shows dissolved iron above 0.3 ppm, and in some sources above 1.0 ppm. Once ferrous iron oxidises inside the RO train, it deposits as reddish-brown rust on membrane surfaces. Standard alkaline CIP cannot remove it — iron oxide is insoluble at high pH. Innova Corporate (India) formulated this iron fouled membrane cleaner for Myanmar plants specifically to dissolve that deposit in a single acidic cleaning cycle.
The cleaner works at pH 2 to 4, chemically dissolving oxidised iron and rust layers without attacking the polyamide or thin-film composite (TFC) structure underneath. It also lifts iron that has co-deposited with silica or organic matter — a combined fouling pattern common in Myanmar's mineral-rich groundwater and monsoon-fed surface sources. After cleaning, membrane permeability returns to near-design values and pressure drop comes back into spec.
For Myanmar plants that use both alkaline and acidic CIP as a two-step program, this cleaner is the acidic stage. Alkaline cleaning first removes biofilm, organics, and oil; then this iron cleaner dissolves the metal oxide layer that alkaline chemistry leaves behind. Following that sequence, plants typically see the best flux recovery and the longest interval before the next cleaning.
Key Features for Myanmar Industries:
- Targets Iron Oxide & Rust Deposits: Acidic formula dissolves the reddish-brown ferric oxide layer that alkaline CIP leaves behind — a common problem in Bago and Yangon borewell-fed RO systems.
- Handles Iron-Silica Co-Fouling: Effective where iron has co-deposited with silica or organic matter, a combined fouling pattern seen in Myanmar's delta and mineral-rich groundwater sources.
- Membrane-Safe Acidic Cleaning: Buffered to protect polyamide, cellulose acetate, and thin-film composite (TFC) membranes during acid CIP, even with repeated cleaning cycles.
- Restores Flux in One Cycle: Typically brings membrane permeability back to near-design values and pressure drop back into spec in a single CIP treatment.
- Extends Membrane Life: Prevents premature membrane replacement caused by irreversible iron fouling — a major cost saving for Myanmar plants managing tight maintenance budgets.
- Two-Step CIP Compatibility: Designed to work as the acidic stage after high pH membrane cleaner in Myanmar's standard alkaline-then-acid cleaning protocol.
- Logistics-Friendly for Myanmar: Stable liquid concentrate in sealed containers — safe for transport to Yangon, Mandalay, Naypyidaw, Bago, and Mawlamyine with full customs documentation.
Recommended Applications in Myanmar: Yangon electroplating and metal finishing units with iron-rich borewell feed; Bago rice mills and agro-processing facilities with dissolved iron above 0.5 ppm; Pathein delta-region plants on canal water containing iron oxide; Mawlamyine coastal industrial units with iron corrosion in pipework; any Myanmar plant where membranes show reddish-brown fouling or pressure drop that does not respond to alkaline CIP.
Dosage & Application: Dose based on the severity of iron fouling and your specific system parameters. Our technical team in Myanmar recommends a customised dilution ratio and contact time based on feed water iron level, membrane model, and history of cleaning cycles. Typical CIP uses a 2–4% v/v working solution at pH 2–4, circulated for 30–60 minutes with a soak period as needed, followed by a thorough permeate flush.
Safety & Handling: To ensure personnel protection during application in Myanmar, appropriate safety gear including splash goggles, lab coats, chemical-resistant gloves, and vapour respirators must be used. In case of skin or eye contact, rinse immediately with copious amounts of fresh water and seek medical consultation. We prioritise workplace safety — refer to the Material Safety Data Sheet (MSDS) for detailed handling protocols.
Storage: To maintain chemical stability and shelf life for your facility in Myanmar, store the product in its original hermetically sealed containers in a cool, dry environment, away from direct sunlight and heat sources. During the monsoon season, keep containers off damp floors and away from condensation. Comprehensive technical data and shelf-life details are available in our Technical Data Sheet (TDS).
Export & Technical Support for Myanmar: We ship regularly to Yangon, Mandalay, Naypyidaw, Bago, Mawlamyine, and other industrial cities across Myanmar with complete customs documentation. Our technical team provides free CIP protocol guidance for iron fouling — including the correct alkaline-acid sequence, contact time, temperature, and post-cleaning flush procedure — tailored to your membrane model and feed water iron level.