- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalants High Silica
RO Antiscalant for High Silica & Metal Oxides in Myanmar
Manage the challenge of silica scaling with our RO Antiscalant High Silica in Myanmar. Innova Corporate (India) provides this specialty product to handle Myanmar's water sources where silica is a major limiting factor for water recovery in industrial units.
Our antiscalant keeps silica in a soluble state, allowing Myanmar plants to operate at higher recovery rates safely. It is a critical chemical for Myanmar’s industrial sector, ensuring that expensive RO membranes are protected from the permanent damage caused by silica in Myanmar's groundwater.
Key Features & Strategic Benefits in Myanmar:
- Critical Silica Control: Prevents complex silica-based scales that are often irreversible.
- Iron Fouling Sequestration: Effectively manages high iron content common in Myanmar to prevent red-brown membrane staining.
- Optimized Recovery: Allows for higher water recovery rates even with high TDS and silica concentrations.
- Membrane Compatibility: Safe and compatible with all major brands of Polyamide, TFC, and NF membranes.
- Environmentally Responsible: Completely organic and biodegradable formulation.
- Maintenance Reduction: Drastically reduces the frequency of chemical cleanings and element replacements for Myanmar plants.
Dosage & Application Guidelines for Myanmar:
High Silica RO Antiscalant should be dosed directly into the feed water line (after pretreatment). Standard dosage ranges from 2 ppm to 20 ppm, depending on Calcium Hardness, Iron, TDS, and Silica content in your Myanmar facility:
- Moderate Hardness: 2-3 ppm is sufficient for alkalinity and hardness control.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 5-7 ppm to effectively stabilize the system against Myanmar's iron-rich groundwater.
- Extreme Silica (Up to 325 ppm): A dosage of approximately 10-15 ppm is recommended for full inhibition in the reject stream.
Storage & Handling: Store in original, tightly sealed containers in a cool and dry environment at your Myanmar site. Keep away from direct heat and sunlight. For customized dosing schedules based on your specific Myanmar water analysis, please consult our Technical Data Sheet (TDS) or reach out to our technical team.